XC7K325T-1FFG676I Replacement: CWC2P300T-FFG676I

ElecSuppliers Component AlternativesAug 13, 2026

Looking for an XC7K325T-1FFG676I Replacement?

XC7K325T-1FFG676I is a specific AMD Xilinx FPGA part number used in programmable logic designs. When an existing product needs an alternative FPGA, searching by the complete part number is usually more useful than searching only for the XC7K325T family.

For this type of replacement requirement, CWC2P300T-FFG676I can be considered as a domestic FPGA option for further evaluation.

The reference devices are:

XC7K325T-1FFG676I

XC7K325T-2FFG676I

The corresponding domestic model is:

CWC2P300T-FFG676I

This makes the device relevant to engineers researching XC7K325T replacement, FPGA localization, and alternative component solutions.

Why the FFG676 Package Matters

The package is one of the first specifications engineers should examine when replacing an FPGA.

CWC2P300T-FFG676I uses the FFG676 package, while the two reference XC7K325T devices are also identified with FFG676:

XC7K325T-1FFG676I

XC7K325T-2FFG676I

For an existing PCB, this provides a useful basis for an initial replacement assessment.

However, package naming alone is not enough to establish pin compatibility. The actual package drawing, ball map, power pins, I/O banks, clock inputs, configuration pins, and other dedicated functions should be checked against the original design.

CWC2P300T-FFG676I at the Device Level

CWC2P300T-FFG676I is part of the CWC2P300T FPGA family.

Compared with smaller FPGA devices, the CWC2P300T family is positioned for designs requiring a larger programmable logic resource set.

Depending on the application, FPGA resources can be used for hardware control, parallel data processing, signal processing, communication interfaces, data acquisition, and customized logic functions.

For an existing XC7K325T design, engineers should first determine the actual resource utilization of the current FPGA project. This provides a better basis for evaluating whether CWC2P300T-FFG676I can meet the requirements.

XC7K325T-1FFG676I and XC7K325T-2FFG676I

The original XC7K325T family reference includes two speed-grade versions:

XC7K325T-1FFG676I

XC7K325T-2FFG676I

This distinction should not be ignored during a replacement project.

An FPGA design may contain timing constraints based on the performance of the original device. Clock frequency, critical timing paths, high-speed interfaces, and other system requirements can all affect the replacement decision.

Therefore, an XC7K325T-1FFG676I replacement should be evaluated using the actual FPGA project and application requirements.

Where a CWC2P300T FPGA Can Be Used

The CWC2P300T family can be considered for programmable logic applications where designers need configurable hardware resources.

Typical areas include:

Industrial control

Communication equipment

Data acquisition

Embedded computing

Signal processing

Automation systems

Test equipment

Custom electronic systems

The FPGA can perform parallel processing and customized logic functions that may otherwise require multiple dedicated components.

From XC7K325T to a Domestic FPGA

Migrating from an existing XC7K325T design involves both hardware and software considerations.

At the hardware level, the engineering team needs to review the package, pin assignment, power rails, I/O configuration, clocks, and external interfaces.

At the FPGA design level, the existing HDL source, IP cores, timing constraints, configuration settings, and development tools need to be reviewed.

The amount of modification depends on the architecture of the original design and the technical differences between the two FPGA platforms.

A Practical Way to Evaluate the Replacement

A useful starting point is to create a device-to-device comparison based on the actual product design.

For example:

Original FPGA

XC7K325T-1FFG676I

Other reference

XC7K325T-2FFG676I

Domestic alternative under evaluation

CWC2P300T-FFG676I

The engineering team can then compare the required logic resources, memory, DSP resources, I/O, clocking, power supply, package information, operating conditions, and timing requirements.

After the initial comparison, a prototype board or evaluation setup can be used to verify the FPGA design and system behavior.

CWC2P300T-FFG676I for FPGA Localization

For manufacturers and engineering teams working on FPGA localization, CWC2P300T-FFG676I is a model that can be included in the evaluation of an XC7K325T-1FFG676I or XC7K325T-2FFG676I alternative.

The FFG676 package is particularly relevant when reviewing an existing board design, while the CWC2P300T family provides the programmable logic platform for further technical assessment.

The device should be treated as a replacement candidate rather than assumed to be a direct drop-in replacement. Final adoption requires verification of the complete technical specifications and the target application.