XC7A200T-2FBG484I Artix-7 FPGA with 215K Logic Cells

ElecSuppliers Part Number GuideSep 06, 2026

The XC7A200T-2FBG484I is a high-density AMD Xilinx Artix-7 FPGA designed for embedded systems that require substantial programmable logic without using the largest available package options. It combines 215,360 logic cells with 740 DSP slices, approximately 13.45 Mbit of integrated RAM and 16 GTP transceivers.

The device uses a -2 speed grade and industrial temperature classification. Its 484-FCBGA package provides 285 user I/O while maintaining a 23 mm × 23 mm package footprint, making it suitable for complex digital designs where processing capacity and board space both need to be considered.

High Logic Density in the XC7A200T Family

The XC7A200T-2FBG484I provides 215,360 logic cells and 16,825 CLB resources. This level of programmable capacity allows engineers to implement large control architectures, parallel processing pipelines, custom communication interfaces and hardware acceleration within a single FPGA.

The 7-series architecture uses configurable logic resources that can be connected and optimized according to the requirements of the application. This is particularly useful for systems that need several processing functions to operate simultaneously.

Compared with smaller Artix-7 devices, the XC7A200T offers significantly more room for complex FPGA designs while retaining the power and cost advantages associated with the Artix-7 family.

740 DSP Slices for Hardware Acceleration

The XC7A200T-2FBG484I includes 740 DSP48E1 slices. These dedicated arithmetic resources can handle multiplication, accumulation, filtering and other mathematical operations without consuming the same amount of general-purpose FPGA logic.

This makes the device suitable for signal-processing applications where large amounts of data must be processed in parallel. Engineers can build dedicated pipelines for functions such as digital filtering, modulation, image processing and numerical calculations.

Combining the DSP resources with the large programmable logic array also allows processing algorithms and control functions to be implemented within the same device.

13.45 Mbit of Integrated RAM

The device provides approximately 13.45 Mbit of total RAM resources. The integrated memory can be used for FIFO buffers, lookup tables, packet storage, image data and intermediate processing results.

For high-throughput FPGA systems, internal memory is particularly useful because it allows data to remain close to the logic and DSP resources. This can reduce unnecessary transfers to external memory and improve the efficiency of parallel processing architectures.

The available RAM can also be combined with external DDR memory when an application requires larger data storage capacity.

16 GTP Transceivers

High-speed serial connectivity is another important feature of the XC7A200T-2FBG484I. The device provides 16 GTP transceivers with data rates of up to 6.6 Gb/s depending on the interface configuration.

These transceivers can be used for high-speed chip-to-chip communication, data acquisition, communications equipment and other applications where a large number of serial data channels are required.

The device also supports PCI Express functionality, allowing the FPGA to serve as a programmable high-speed interface between a host processor and dedicated hardware-processing logic.

484-FCBGA Package for Dense FPGA Designs

The XC7A200T-2FBG484I uses a 484-FCBGA package with an approximately 23 mm × 23 mm body size and 285 user I/O.

This package provides a useful balance between FPGA capacity and physical size. The XC7A200T-2FBG676I provides a larger I/O count, while the FBG484 version can be more appropriate when the system does not require as many external connections.

Package selection should therefore be based on the actual I/O requirements of the board, including memory interfaces, high-speed serial links, clocks, control signals and peripheral connections.

Industrial Temperature and -2 Speed Grade

The XC7A200T-2FBG484I is specified for an industrial junction temperature range of -40°C to +100°C. The -2 designation identifies its speed grade within the XC7A200T family.

This combination makes the device suitable for industrial embedded equipment and other applications that operate across a wider temperature range.

When comparing this part with commercial XC7A200T variants, the temperature suffix should be checked carefully. The industrial version is intended for more demanding environmental conditions and should be evaluated according to the thermal requirements of the final system.

Applications of XC7A200T-2FBG484I

The large logic capacity and high-speed resources of the XC7A200T-2FBG484I make it suitable for a broad range of demanding digital applications.

Potential applications include industrial vision, high-speed data acquisition, communications equipment, software-defined radio, test and measurement systems, video processing and embedded hardware acceleration.

The 740 DSP slices are useful for signal-intensive workloads, while the 16 GTP transceivers provide multiple high-speed serial connections. This combination allows a single FPGA to perform processing, interface management and data movement within one programmable architecture.

XC7A200T-2FBG484I for High-Capacity Embedded FPGA Designs

The XC7A200T-2FBG484I provides the processing resources of the XC7A200T family in a more compact 484-FCBGA package. With 215,360 logic cells, 740 DSP slices, 13.45 Mbit RAM and 16 GTP transceivers, it can support complex FPGA architectures without requiring the larger 676-ball package.

For designs where 285 user I/O is sufficient, the FBG484 configuration offers an effective balance between programmable processing capacity, high-speed connectivity and PCB space.

Its industrial temperature rating and -2 speed grade further position XC7A200T-2FBG484I for demanding embedded and industrial applications requiring a high-capacity Artix-7 FPGA.