AF2512FK-071KL is a YAGEO AF series thick film chip resistor with a resistance of 1 kΩ, tolerance of ±1% and power rating of 1 W. It uses the 2512 package and is designed for applications that require a relatively high power rating in a compact surface-mount resistor.
The AF series is part of YAGEO's chip resistor portfolio and includes multiple resistance values, tolerances and package sizes. The AF2512FK-071KL configuration combines the 2512 package with a 1 kΩ resistance value and 1% tolerance, making it a useful option for precision resistance requirements in power and control circuits.
AF2512FK-071KL has a nominal resistance of 1 kΩ with a tolerance of ±1%. Its rated power is 1 W, and the component uses a 2512 surface-mount package. Distributor specifications identify the part as a thick film resistor with an operating temperature range of -55°C to +155°C.
The 2512 package corresponds to approximately 6.35 mm × 3.20 mm for this AF-series component. The relatively large chip size provides more physical area for heat dissipation than smaller chip resistor packages, allowing the resistor to handle higher power levels when the PCB layout and operating conditions are appropriate.
The resistance temperature coefficient is specified at ±100 ppm/°C. This parameter indicates how much the resistance can change as the component temperature varies and is important in circuits where resistance stability affects measurement or control accuracy.
A 1 kΩ resistance value is widely used in electronic circuits. Depending on the circuit, it can be used for current limiting, voltage division, biasing, pull-up or pull-down functions, gate control and signal conditioning.
The 1 W power rating gives AF2512FK-071KL a higher power capability than many commonly used 1/8 W or 1/4 W chip resistors. This makes the component more suitable for circuits where the resistor may experience higher continuous dissipation.
The actual power dissipation should always be calculated from the circuit conditions. A 1 W rating does not mean that the resistor should continuously operate at 1 W under every PCB and ambient-temperature condition. Thermal derating and the temperature of the surrounding board should be considered during circuit design.
AF2512FK-071KL is identified as an AEC-Q200-rated component, making the AF series relevant to automotive electronic applications that require qualified passive components.
Automotive electronic systems frequently contain resistors in power management, sensor interfaces, control modules and signal-conditioning circuits. A 2512 resistor with a 1 W rating can be useful in locations where a standard small-signal resistor would have insufficient power-handling capability.
The AEC-Q200 qualification is particularly relevant when selecting passive components for automotive designs because the qualification addresses reliability requirements for passive electronic components used in demanding environments.
The 2512 package is a surface-mount format commonly identified as 2512 in imperial dimensions and approximately 6432 in metric terminology for this component family.
Compared with smaller packages such as 0402, 0603 and 0805, the 2512 package occupies considerably more PCB area. However, the larger footprint provides advantages when higher power dissipation, easier assembly or improved thermal performance is required.
AF2512FK-071KL has two electrical terminations and is supplied in tape-and-reel packaging for automated surface-mount assembly.
During PCB design, sufficient copper area around the resistor can help remove heat from the component. The required copper area depends on the actual power dissipation, board construction, ambient temperature and other thermal conditions.
When using AF2512FK-071KL as a 1 kΩ resistor, designers should check both resistance accuracy and power dissipation.
At a given voltage, resistor power can be calculated from the applied voltage and resistance. At a given current, the power depends on the square of the current. This means a circuit operating close to the 1 W rating can experience significant temperature rise, especially in a compact enclosure or PCB with limited thermal conduction.
The ±1% tolerance makes this component suitable for circuits where a tighter resistance tolerance is required than the commonly available ±5% option. The ±100 ppm/°C temperature coefficient also provides better resistance stability than many general-purpose thick film resistor options.
When replacing AF2512FK-071KL, the replacement should match the 1 kΩ resistance, ±1% tolerance and required power rating. Package dimensions and PCB land pattern should also be checked because a resistor with the same resistance but a smaller package may not provide the required power capability.
YAGEO offers several related 2512 resistor families with similar electrical values. For example, RC, AC and AA series parts can have the same nominal resistance and power rating while differing in features such as automotive qualification or environmental performance. DigiKey currently lists related YAGEO 2512 1 kΩ 1 W parts, including the AC2512FK-071KL, as active products.
For an automotive design, it is especially important to verify the required qualification rather than selecting a replacement solely because the resistance and package are identical.
AF2512FK-071KL remains listed by component distributors as an active YAGEO part number. Current distributor information identifies it as a 1 kΩ, ±1%, 1 W, 2512 thick film chip resistor with AEC-Q200 qualification.
Availability can vary between distributors and regions. When sourcing for production, buyers should confirm the exact manufacturer part number, packaging method, current inventory and lead time rather than relying on older distributor listings.
AF2512FK-071KL combines a 1 kΩ resistance value, ±1% tolerance, 1 W power rating and 2512 surface-mount package in YAGEO's AF series.
Its relatively high power rating and automotive qualification make it relevant to automotive electronics, industrial equipment, power circuits and control systems where a compact but robust surface-mount resistor is required.
For new designs, the resistor should be selected according to actual voltage, current, power dissipation and temperature conditions. For replacement applications, the complete AF2512FK-071KL specification should be compared with the original component to ensure electrical, thermal and mechanical compatibility.
R46KI2220JH01M KEMET 0.022µF X2 Safety Film Capacitor
RSBIC2100AA00K KEMET 0.01µF 250V Film Capacitor
Explore related electronics articles and guides.
STM8S003F3P6TR is a 16MHz STM8 8-bit microcontroller with 8KB Flash, 1KB RAM, 128-byte EEPROM, 10-bit ADC and UART SPI I2C interfaces.
STM8S003F3U6TR is an 8-bit STM8 microcontroller with 8KB Flash, 1KB RAM and integrated timers, ADC, UART, SPI and I2C interfaces.
S-80139ALMC-JAYT2G is a 3.9V voltage detector from the ABLIC S-801 series for power supply monitoring and reset control in electronic systems.
CL10B334KPNC is a Samsung Electro-Mechanics 330nF X7R multilayer ceramic capacitor in a compact 0603 package for decoupling and electronic circuits.
TPCP8107 is a P-channel MOSFET designed for compact power switching, load control and power management applications.
RRA1GC112X is a compact 12V relay designed for signal switching and control applications in industrial and electronic equipment.
SBS26H is a Schottky barrier diode designed for high-speed rectification and low-voltage power switching applications.
S-1112B27PI-L6MTFG is a 2.7V 150mA CMOS LDO voltage regulator with low dropout voltage, high ripple rejection and enable control.
RT1206WRC072K4L is a 2.4KΩ ±1% thick film chip resistor in a 1206 package for power, voltage divider, feedback and general PCB applications.
RC0402FR-071K4L is a YAGEO 1.4KΩ ±1% thick film chip resistor in a compact 0402 package with 1/16W power rating and ±100ppm/°C tolerance.
STP200NF04 is a 40V N-channel power MOSFET designed for high-current switching applications including power supplies, motor control and automotive electronics.
RWR89N18R0BSB12 is a Vishay Dale RWR89 series wirewound resistor with 18Ω resistance, ±1% tolerance and 3W power rating.
Copyright © ElecSuppliers.com. All Rights Reserved.