2N7002: 60 V N-Channel MOSFET Features and Applications

ElecSuppliers Part Number GuideAug 20, 2026

The 2N7002 is an N-channel enhancement-mode MOSFET commonly used for low-power switching and signal control. With a drain-source voltage rating of 60 V and a compact surface-mount package, it can be used in a variety of digital and analog electronic circuits.

2N7002 MOSFET Overview

The 2N7002 is designed for switching applications where a small-signal N-channel MOSFET is required. Its compact package makes it suitable for PCB designs where board space is limited.

The device can be controlled through its gate terminal, allowing a relatively small control signal to switch the load connected between the drain and source.

2N7002 Electrical Characteristics

The 2N7002 has a drain-source voltage rating of 60 V and a drain current rating of up to 300 mA under specified conditions.

As with other MOSFETs, the actual current capability in a circuit depends on operating temperature, PCB layout, package thermal characteristics and the electrical conditions of the application.

Engineers should therefore evaluate the complete set of electrical characteristics rather than selecting the device based only on its maximum voltage or current rating.

Logic-Level Switching

The 2N7002 is suitable for applications involving logic-level signal switching. A microcontroller or digital logic circuit can control the MOSFET through its gate to switch another circuit or signal path.

This makes the device useful for tasks such as signal control, level translation and switching small loads.

The required gate voltage should be evaluated against the specific operating conditions of the circuit. A MOSFET should not be considered fully enhanced simply because its gate threshold voltage has been reached.

2N7002 Switching Applications

The 2N7002 can be used in high-speed switching and signal-control applications. Its small size and N-channel configuration make it suitable for circuits that require compact semiconductor switching elements.

Typical applications include logic-level translation, high-speed line drivers, switching circuits and other low-power electronic control functions.

2N7002 Package and PCB Design

The surface-mount package of the 2N7002 makes it convenient for compact PCB assemblies and automated manufacturing.

When designing a PCB around the device, engineers should consider the drain and source connections, gate routing, switching speed and thermal characteristics of the package.

For applications involving rapid switching, PCB trace layout and parasitic capacitance can also influence overall circuit performance.

2N7002 in Signal Control Circuits

A common use of the 2N7002 is controlling signals between circuits operating at different logic levels. The MOSFET can provide a simple switching element while allowing the control circuit to remain electrically separated from the switched signal path.

Its suitability depends on the voltage levels, switching frequency, current and signal characteristics of the application.

Selecting a 2N7002 MOSFET

Before selecting a 2N7002 for a design, engineers should evaluate drain-source voltage, drain current, on-state resistance, gate characteristics, switching requirements and package limitations.

The maximum ratings in the datasheet should not be treated as normal operating targets. Appropriate voltage and current margins are important for reliable operation.

2N7002 Applications

The 2N7002 can serve as a compact switching component in embedded electronics, digital interfaces, signal-control circuits and other low-power applications.

Its combination of a 60 V voltage rating, N-channel configuration and small surface-mount form factor makes it useful where a compact MOSFET is needed for switching or signal-control functions.